Brand: Made in Spain
Model: Hgh control
Type: Ceiling soundproofing system
Description: Specialized vibration spring pads have been developed with low resonance frequency, which will allow the system to be more efficient at low frequencies than all other systems. The system allows it to be made in different thicknesses, which is suitable for each individual case. By using synthetic wool for acoustic material that gives better acoustic performance, the standards for an environmentally friendly product are met. The gypsum plasterboard in combination with the soundproofing membrane provide the necessary weight to reduce the passage of sound waves between rooms. The finishing gypsum board is selected to be easily processed and prepared for paint. The soundproofing membrane is also specially selected so as to have maximum plasticity to create sufficient shear resistance between the panels and to reduce the resonance effect of the matching frequencies. The elastic microporous rubber band separates the plasterboard and membrane panels from the contact elements of the floor and ceiling slabs and the surrounding perpendicular walls.
Technical characteristics:
Sound insulation Rw = 72dB *
Thickness from 200 to 1000mm
Possibility for leveling - up to 800mm
* Sound insulation index for reinforced concrete slab 180mm with 20mm plaster
The system includes:
Elastic separating, microporous, rubber band 4mm thick and 50mm wide
Specialized silicone anti-vibration suspension Senor, model SE-6025/V-M8 DS
Metal construction of steel CD profiles
Synthetic cotton wool weighing 400g / m2, from the Spanish manufacturer CHOVA
Knauf Vidiwall plasterboard
The soundproofing membrane ViscoLAM 2mm from the Spanish manufacturer CHOVA
Knauf gypsum board
Finishing materials such as glass fiber tape and grout.
NOTE:
Plastering and painting materials are not included in the system.
Installation:
The MUSIC CONTROL system can be installed by our ACOUSTIC FORCE partners as well as by qualified drywall assembly teams.
Technical card:
A technical map of the system can be found here.
How our system works:
The simplified model used for system design is the vibro-acoustic model of mass-spring-mass (see drawing), where m1 is the mass of the existing wall, m2 is the total mass of
gypsum board, membrane and gypsum board. The marks k and d represent the elastic relationship between the two masses (anti-vibration suspension) and the damping porous plane (synthetic wadding). ).
The influence of the elastic bond between the wall and the panels is defined by a number of suspension parameters, such as dynamic stiffness, viscosity, natural frequency and frequency-dependent elasticity. All of these parameters are combined and carefully designed for each system to minimize the transmission of structural vibrations from the existing wall to the combined panels. with the wall.
Purpose: The HIGH CONTROL system is a high-end soundproofing system for ceilings, intended for public and industrial buildings. Where the sound load is from loud music, machines or the highest class of isolation is sought. Also intended for special purpose rooms (studios, hospital rooms, music rooms, laboratories, etc.)
