Brand: Amorim
Model: Elastic insulating tape
Type: Sound-absorbing
Note: Price is per meter!
Description:MS-R2 - a Wall Bearing material - is part of the Amorim Cork Composites range and it represents an excellent solution for acoustical and vibration issues. MS-R2 is manufactured from cork and recycled polyurethane granulate and it has been developed to effectively interrupt the transmission of footstep noise vertically through the masonry. If wall bearings are used consistently throughout a building, and other sound transmission vectors are eliminated, this can significantly improve the quality of living conditions. The product is suitable for acoustic insulation in non-loadbearing walls.
To provide effective sound insulation without sound can be spread on the structure of solids, all components must be isolated without leaving hard contact points. Material - cork and poliuretan.
INSTALLATION:
Before the MS-R2 wall bearing is installed, check the floor for surface irregularities. If it is uneven (with projections, surface roughness or similar), apply a smooth mortar layer; After the surface layer has been allowed to dry, lay the wall bearing. Make sure that it projects by approx. 15mm on the side on which the wall is to be plastered; Sections of wall bearing are butt-jointed together, and the joint secured with adhesive tape for concrete.
Specifications:
Scope of load:
WORK LOAD: 0.1 - 0.43 MPa (14.5 - 62.43 psi) At 25% deviation
MAXIMUM VOLTAGE: 1.25 MPa (181.3psi) At <50% offset
E-MODULE
STATIC: 1.38-2.30MPa (200.15 - 333.59psi) (DIN 53513 (ADAPTED) - TANGENIAL MODULE)
DYNAMIC: 3.8-13.0 MPa (551.14 - 1885.49 psi) (DIN 53513 (ADAPTED) - Depending on load and frequency)
Compression Set (%): 50% (DIN 53572 - 30 minutes measured After 50% separation)
Tensile Strength (MPa): (> 0.1 (> 14.5 psi) (DIN 53571)
Density (kg / m³): 250 (15.6lb / ft3) (ASTM D297)
Natural frequency (Hz) for 10 mm thickness: 25Hz (at 0.43MPa STRESS)
Dimensions: 150mmх10ммx10m-roll
Advantages:
High resistance to compression
Low dynamic stiffness
Resistance to liquid contact
Sustainable and recyclable
Necessary data for design: Load. Requirements for the attenuation or desired natural frequency. Type flying - concrete, wood, etc. Contact surface (type and size).
Application: Used to separate (floating) floors, walls, ceilings and staircases surrounding / supporting structure.
