Brand: LED Spektar<\/p>\n
Model: RGB DMX 30W<\/p>\n
Type: External spotlight<\/p>\n
Description:<\/p>\n
External RGB spotlight with silver body and strong light - 30W. Use of a multi-chip, in the main frame, such light emitting device, more than 16,777,000 type colors can be realized with a good luminous efficiency, a beautiful color, etc. Standard DMX512 input interface and built-in controller can be implemented in full or segmented control for changing colors, especially can achieve water effects and other complex effects. Master or Slave function if set to Master can use an external controller. Reliable 350 mA DC, designed to provide powerful illumination ice for stable operation. High ability to adapt to the environment, with protection class IP65, can adapt to different internal and external temperature and humidity of the environment. The base of the lamp is made of aluminum alloy, it is robust and protected from corrosion.<\/p>\n
Technical parameters:<\/p>\n
Product type: RGB dmx flood light floodlight 30W<\/p>\n
Light source: 3W LED MOULD<\/p>\n
LED quantity: R10G10B10<\/p>\n
Input voltage: DC24VAC100-240V 50 \/ 60Hz<\/p>\n
Maximum power: 37W<\/p>\n
Tok: 35mA<\/p>\n
Angle of illumination: 120 °<\/p>\n
Projection distance: 10-20m<\/p>\n
Control mode: standard DMX512 \/ local control<\/p>\n
Color: 16777216 true colors<\/p>\n
RF: 315MHz 30-50M (optional)<\/p>\n
Ambient temperature: -20 ° C ~ 45 °<\/p>\n
Protection: IP65<\/p>\n
Life:> = 35,000 hours<\/p>\n
Weight: 2.1 kg<\/p>\n
Size: 225x185x130mm<\/p>\n
<\/p>\n
Control:<\/p>\n
DMX control<\/p>\n
Login - two male pin waterproof connectors, 300mm, 2x1mm2.<\/p>\n
DMX signal, waterproof three-pin male connector, 300 mm, 3x0.5mm2 DMX signal, three-pin female waterproof connector, 300 mm, 3x0.5mm2<\/p>\n
<\/p>\n
DMX<\/p>\n
<\/p>\n
1 GND (SHIELD)<\/p>\n
2 DMX - (BROWN)<\/p>\n
3 DMX + (BLUE)<\/p>\n
<\/p>\n
POWER<\/p>\n
<\/p>\n
1 GND (BLACK)<\/p>\n
2 24V (RED)<\/p>\n
<\/p>\n
ADAPTER<\/p>\n
<\/p>\n
1 VCC (RED)<\/p>\n
2 GND (GREEN)<\/p>\n
3 DMX (BLUE)<\/p>\n
4 DMX + (YELLOW)<\/p>\n
<\/p>\n
RF devices (optional)<\/p>\n
<\/p>\n
1. Effect up<\/p>\n
2. Effect down<\/p>\n
3. Brightness (increase) (1-10 levels) mode only 1-10<\/p>\n
Speed \u200b\u200b(1-10 levels) mode only 1-10<\/p>\n
4. Brightness (decrease) (1-10 levels) mode only 1-10<\/p>\n
Speed \u200b\u200b(1-10 levels) mode only 1-10<\/p>\n
5. Reset (mode = F11, Speed \u200b\u200b= 4, Brightness = 10)<\/p>\n
6. LAMP OFF<\/p>\n
F01: STATIC RED<\/p>\n
F03: STATIC ORANGE<\/p>\n
F04: STATIC COLD WHITE<\/p>\n
F05: STATIC YELLOW<\/p>\n
F06: STATIC PINK<\/p>\n
F07: STATIC GREEN<\/p>\n
F08: STATIC PURPLE<\/p>\n
F09: STATIC CYAN<\/p>\n
F10: STATIC BLUE<\/p>\n
F11: RGB GRADUAL<\/p>\n
F12: RGB CHAN<\/p>\n
F13: RGB FLASH<\/p>\n
<\/p>\n
Color \/ angle lighting<\/p>\n
<\/p>\n
Red:<\/p>\n
<\/p>\n
λd \/ CCT: 625 nm<\/p>\n
Typical lumens: 400-500 lm<\/p>\n
Voltage: 16-18 V<\/p>\n
Current Current: 350mA<\/p>\n
<\/p>\n
Green:<\/p>\n
<\/p>\n
λd \/ CCT: 525 nm<\/p>\n
Typical lumens: 700-800 lm<\/p>\n
Voltage: 26-28 V<\/p>\n
Current Current: 350mA<\/p>\n
<\/p>\n
Blue:<\/p>\n
<\/p>\n
λd \/ CCT: 460 nm<\/p>\n
Typical lumens: 200-250 lm<\/p>\n
Voltage: 26-28 V<\/p>\n
Current Current: 350mA<\/p>\n
<\/p>\n
Notes:<\/p>\n
<\/p>\n
a) products must meet appropriate environmental requirements.<\/p>\n
b) when applied DMX, each projector needs three addresses that can be set with buttons or our special devices.<\/p>\n
c) If your desire is to group lights have the same effect, the group lights must be set to the same address.<\/p>\n
d) The largest lighting control points can not be more than 510.<\/p>\n
e) associated with a group of lights is only one master (working lights in master mode, controller or console).<\/p>\n
f) More than one connection of lights should chart link products.<\/p>\n
g) the controller or signal splitter to connect the rear end of the light can not be lower than the maximum length of 30 meters.<\/p>\n
h) In order to ensure reliable transmission of the DMX signal, if the connection of the lamp is over 100 m, should be added to the transmission signal amplifier DMX signal line for signal amplification.<\/p>\n
<\/p>\n
Inputs and outputs must meet the requirements, otherwise<\/p>\n
may follow light damage. Male XLR input and output XLR females.<\/p>\n
Application:<\/p>\n
LED cold light source, a wide range of output colors, wall washer - is seen using LED as a light source can be widely used for various light colored walls for decoration of scenes and conference halls, historical buildings, squares and cultural Thousands of satisfied clients places.<\/p>\n","protected":false},"excerpt":{"rendered":"