Telescopic Lifting Tower ELC-760

Brand: Guil

Model: ELC-760

Type: Stage lifts

Description:

Telescopic lifting tower ref. ELC-760. Maximum height: 5.40 m (17′ 8.59″) / Maximum load capacity: 180 kg (396.83 lb)

Mast Sections: 

This wind-up stand consists of four telescopic sections made in reinforced steel and finished in a textured, black, anti-scratch, powder coating (Epoxy). This finish makes the tower suitable for outdoor use, guaranteeing maximum corrosion resistance.

The masts are equipped with:

a) Welded reinforced ending which strengthens the mast.
b) Mast adjustment system to prevent wobbling of the mast sections (metallic ergonomic knob).
c) Pulley protectors which reduce the chance of damage to the pulleys during handling and transportation at the same time preventing the cable from coming out of the pulleys.
d) The top mast comes with a reinforcing ferrule.

Base section:

The compact base of 41 x 41 cm (1′ 4.14″ x 1′ 4.14″), is specially designed to allow access to reduced spaces with the tower.

It is equipped with four detachable stabiliser legs, provided with leveller screw jacks that have reinforced nylon spin handles (ergonomic design) with a double-start thread (quicker adjustment) which facilitates the levelling task and chrome foot plates with non-slip injection moulded rubber pads. These foot plates ensure a perfect adjustment of the tower to the floor surface.

Lifting process:

For a quick, safe and effortless lifting process, ELC-760 telescopic towers are equipped with an AL-KO 900 hand winch with automatic braking system, which stops and holds the load at the desired height: once you have reached the desired height, by letting go of the winch handle the braking system automatically stops and holds the load in place.

The mast sections are extended by means of a set of pulleys with bearings and a galvanised steel wire rope with steel core (Composition: 7×19+0), specially manufactured for lifting heavy loads (DIN 3060).

Note: The masts are blocked at the desired height using the safety bolts (essential during the use of the tower)
It is provided with a spirit level, for a proper vertical adjustment of the telescopic masts and levelling of the tower.

Transportation:

Its base is provided with four heavy-duty swivel castors, two with brake to make handling and transport an easy task. The wheels are secured to the base using a metal plate with 4 fixing points; to guarantee a secure fix even when moving the tower on uneven ground.

Safety Systems: 

ELC-760 has two safety systems which guarantee maximum reliability during the lifting and lowering procedure.

1.- Automatic brake winch from the Austrian manufacturer AL-KO ref. AL-KO 900

Its auto-block system ensures the load remains at the required height; once the required height is achieved, the braking mechanism blocks the load when the handle is released.

2.- ASB System (Automatic Safety Blocking System).
Zip/Trigger safety system with safety bolts. In the extreme case of cable breakage, the safety bolt would immediately block the mast, stopping the load from falling.

The ELC-760 tower is manufactured with the most advanced welding equipment which guarantees the highest level of safety and strength, complying with the lightweight, sturdiness and manoeuvrability requirements needed to lift heavy loads.

ELC-760 towers comply with the safety requirements according to the following Standards and Regulations:

– DGUV Regulation 17 & 18
– DGUV Rule 115-002
– DIN 56950-1
– 2006/42/CE

VERY IMPORTANT: THE LIFT IS NOT TO BE USED AS A HOIST FOR LIFTING PEOPLE.

Technical characteristics:

Maximum height: 5.40m
Maximum load: 180kg
Folded size: 0.485x0.42x1.82m
Net weight: 55.00kg
Working Height: 1.82

Adapters: Ø 35mm
Minimum load: 25kg
Working base: Ø 208 cm
Brake winch: 450 kg

Material: steel S 235 JRH

Color: black - epoxy paint

Standards: 206/42 / CE, DGUV Rule 115-002 DGUV Regulation 1,17,18

Application: Concerts, Exhibitions, Stage Farms, Rental for LED Light Effects, Rental Events and more.