Plasterboard HABITO RIGIPS 12.5/1200/2000 мм

Brand: RIGIPS
Model: HABITO 12.5mm
Type: Plasterboard
Description:

Habito® DFRI 12,5 mm controlled density fire resistant board with anhanced strength and improved surface hardness Designed for use in Rigips, Gyproc and Placo wall and partition systems where greater levels of impact/duty, fixing capability and fire protection are required.

Cutting
The  Habito®  board  may  be  cut  using  a  plasterboard  saw  or  by  scoring  with  a  sharp  knife  and  snapping  the board  over  a  straight  edge.  Holes  for  switch  or  socket  boxes  should  be  cut  out  before  the  boards  are  fixed using  a  utility  saw  or  sharp  knife.  When  cutting  boards,  power  and  hand  tools  should  be  used  with  care  and in  accordance  with  the  manufacturers’  recommendations.  Power  tools  should  only  be  used  by  people  who have  been  instructed  and  trained  to  use  them  safely.  Appropriate  personal  protective  equipment  should  be used.   


Fixing
Fix  boards  with  decorative  side  out  to  receive  joint  treatment  or  a  skim  plaster  finish.  Lightly  butt  boards together.  Never  force  boards  into  position.  Install  fixings  not  closer  than  15  mm  from  cut  edges  and  10  mm from  bound  edges.  Position  cut  edges  to  internal  angles  whenever  possible,  removing  paper  burrs  with  fine sandpaper.  Stagger  horizontal  and  vertical  board  joints  between  layers  by  a  minimum  of  600mm.  Locate boards to  the  centre  line  of  framing  where  this supports board edges or  ends. 

Jointing
Jointing materials produce a smooth, continuous, crack-resistant surface ready for priming and final decoration. A number of jointing specifications are available to suit the board type, method of application and site preference. Vario joint filler and glass fibre tape is recommended for joint preparation.

Finishing
The face of Habito® boards can be plastered with ProMix Finish or other plasters. There should be the minimum of delay between completion of the lining and the commencement of plastering.


Decoration
After  the  plaster  finish  or  joint  treatment  has  dried,  decoration,  including  any  decorator’s  preparatory  work, should  follow  with  minimum  delay.   


Fixing  capability:  15kg  number 10  wood  screw (5x50  mm)
A  no.  10  woodscrew  will  provide  a  safe  working  load  (SWL)  of up  to  15kg  per  fixing.  We  recommend  that  you  follow  the manufacturer’s  guidance  as  to  the  number  of  fixtures  required to  mount  a fixture. Example: If  a  TV  weighs 15kg  with  its bracket and  the  bracket  accepts  four  fixings,  you  should  use  four  screws,  even  though  this  provides  60kg  safe working load. Fixings / fixtures should  not be  made  into  damaged  areas.


Effect  of  temperature
Habito® boards  are  unsuitable  for  use  in areas subject  to  continuously  damp  or  humid  conditions, i.e.  above 70%  RH,  and  must  not  be  used  to  isolate  dampness.  The  Habito®  boards  are  not  suitable  for  use  in temperatures above 50°C  but can  be  subjected  to  freezing  conditions without risk  of  damage. 

Technical Parameters:

Product type EN520: DFRI
Reaction to fire EN520: A2-s1; d0
Longitudinal edge type: PRO Paper edge
Transverse edge type: Straight cut edge
Nominal value EN520: 12.5 mm (± 0.5)
Size: 12.5 * 1200 * 2000 mm
Tolerance on width: + 0 / -4 mm
Tolerance of length + 0 / -5 mm
Tolerance for rectangularity: ≤ 2.5 mm
Weight: 12.2 kg / m2 (± 0.5)
Density EN520:> 920 kg / m3
Bending strength (longitudinal direction) EN 520: min. 1100 N
Bending strength (transverse direction) EN520: min. 500 N
Shear strength EN520: 1364 N
Brinell hardness (6875 N, hollow diameter 6 mm) EN ISO 6506-1: 2006: 218 N / mm
Solid impact (tested on CW 75/100 barrier) ISO 7892: 1998: Category I-II.
Soft body impact (tested on CW 75/100 barrier) ISO 7892: 1998: Category II.
VOC emissions ISO 16000-9: 2006 CEN / TS 16516: 2013: A +
Thermal conductivity EN 520: 0.25 W / mK
Water vapor diffusion resistance coefficient µ EN 520: 6-10
Maximum allowable temperature: 50 ° C
Fire resistance EN 520: See manufacturer's system documentation.
Airborne sound insulation: See manufacturer's system documentation.

Application: According  to  installation  manual.