Aluminum staircase for scenes. ECT20-80

Brand: GUIL

Model: ECT20-80

Type: Scene accessories

Description: 

ECT20-80 Access Stair for a stage height of 1000 mm is composed of four modular steps of 300x 800 mm (net weight of each step: 9 kg) each with a set of 3 fixed height legs & 1 fixed height leg with leveller. Includes two handrails

* 1st Step: 200 mm high.
* 2nd Step: 400 mm high.
* 3rd Step: 600 mm high.
* 4th Step: 800 mm high.

> Net Weight: 51 Kg

The modular stair system consists of separate steps, which can be put together to set a stair of any desired height, making it a perfect element for different stage heights. Steps can be set up end to end, making it possible to achieve different stair widths. Note: Recommended height between steps is of 200 mm.

 Frame:

Steps from ECM adjustable stair system have a heavy-duty frame made with special aluminium profiles (80 mm) with a high load capacity (alloy EN-AW 6082 T6 in accordance with UNE-EN573). Its continuous rail design allows an easy attachment of a wide range of accessories: safety rails, skirting, etc.

The birch plywood panel is secured to the frame structure by means of stainless steel screws and silicone, which prevent possible noises and vibrations, and also contribute to their overall weather resistance.

Each leg socket, made in sturdy aluminium, is secured to the profiles by means of 4 bolts and self-locking hex nuts; guaranteeing maximum strength.

Panel: 

The steps have a weather resistant 21 mm thick panel made out of best quality 100 % Birch Plywood (WBP) composed of 15 layers, each layer is coated with phenolic resin making them resistant to bad weather conditions and humidity.

The steps have a weather resistant 21 mm thick panel (15 plies) made out of best quality 100 % Birch Plywood (WBP) composed of 15 layers, each layer is coated with phenolic resin making them resistant to bad weather conditions and humidity.

The top side of the panel has a non-slip finish created by a wire mesh pattern printed thanks to a hot pressing process and has a water resistant treatment, as well as being treated to protect it against commonly used chemicals; features that guarantee the highest resistance and durability for both indoor and outdoor use. To make this panel even longer lasting, all its edges have been sealed with black acrylic paint (according to BFU 100) and silicone to prevent water infiltration.

This plywood is specially designed for those applications where high wear resistance and good non-slip properties are required. The composition and density of the plywood make our panels very compact and sturdy.

The birch panel used meets the requirements of the following standards:
– SFS 2415 / type EXT
– DIN 68705 part 3 / type BFU 100
– BS 6566 part 8 / type WBP
– EN 314-2 / type EXT

NOTE: Our access stairs are designed for situations where short periods of rain or bad weather may appear and threaten your event. Rather than having to dismantle your stage immediately, the show can go on without fear of the step surface warping or delaminating like others. If the bad weather persists the steps should be dried and stored away. The access step surface is weather resistant, NOT WATERPROOFED, but can withstand moisture on an intermittent basis. They were not designed to be used as a permanent installation where they are exposed to harsh elements all year round.


Legs: 

ECT20-80 Access Step is supplied with one set of 3 fixed height legs & 1 fixed height leg with leveler which allows an adjustment of 50mm. Its design ensures a perfectly levelled step when setting up on slightly uneven surfaces.

Manufactured with extruded aluminium (Alloy: EN-AW 6082 T6), have a square profile of 50 x 50 mm and special non-marring non-slip terminals. The legs are easily and quickly secured into the sockets in the frame with a pressure wedge that is tightened by an ergonomic metal knob, which also guarantees maximum safety and durability.
ECT Modular stairs can be manufactured on request to any desired height;

Components: 

ECT20-80 Stair system includes all elements, clamps and connectors needed for a safe and fast stair assembly:
– 1 Connector to fix the modular stair to the stage, ref. AN-ECT.
– 6 Leg-to-leg connectors ref. TMU-07 to join the different steps by their legs and to stabilise the whole modular structure.


ECT20-80 includes a set of two handrails ref. PSA-06 with a quick and easy installation, manufactured in reinforced aluminium for maximum durability and a professional appearance. PSA-06 is designed to be attached every 3 steps and comes complete with four connecting clamps Ref. ANQ, used to fix them to the profiles of the steps.

Protective plate inside the handrail holder. Prevent the screw from damaging the handrail and provides a firmer hold of the rail.

Technical parameters:

Number of steps: 4pcs.
Height: 800mm
For stages with height from-to: 1000mm
Net Weight: 51kg
Weight of Steps: 9kg each.

Application: